Instrument details: Linus Ehlert - Electric guitar

The choice and position of controls is an early design choice

Photo added on 20/12/2020

Work starts with joining the alder body

Photo added on 20/12/2020

Routing the pocket for the neck join

Photo added on 20/12/2020

Gluing the scarf join for the headstock

Photo added on 20/12/2020

The truss rod is glued with epoxy resin

Photo added on 20/12/2020

Fitting the truss rod

Photo added on 20/12/2020

Gluing the neck

Photo added on 20/12/2020

Gluing the ebony fingerboard

Photo added on 20/12/2020

The fret ends are cut slightly short with the ends then filled with shellac stick

Photo added on 20/12/2020

Oiling the fingerboard

Photo added on 20/12/2020

Tuning up and testing after reassembly

Photo added on 21/12/2020

Reassembly complete

Photo added on 21/12/2020

Linus with his completed guitar

Photo added on 21/12/2020